Even professionals get it wrong

imageBefore I had the time and space (and skill and confidence?) to build such a thing my wife and I bought an oak sideboard. It purported to be made in England from domestic oak and I have no reason to doubt that. It’s got big, chunky, machine cut dovetails and the drawer fronts are applied. We still like it a lot. It’s a simple design with little decoration, nice proportions and is solidly constructed. The flat panels and simple, turned wooden pulls might be described as ‘Shaker’ by those who need to put a label on simple vernacular furniture.

At the same time we bought a ‘matching’ blanket box. It has an issue that I should have spotted even then. We were clearly carried away with the sideboard and didn’t pay enough attention. Those furniture salesmen eh? Wiley Devils. Here are the tops of both. Can you see the problem?

On the left is one panel of the top of the sideboard. The panel is fitted into an open backed frame and is rebated so that the surfaces of the panel and frame are flush. As the seasons change the panel expands and contracts and sometimes (as now at the end of a warm, damp summer) protrudes beyond the back of the frame. Because the grain is orientated so that it runs lengthways it will never expand along the length of the piece and so will never distort the frame. Good thinking sideboard-maker.

For whatever reason (lack of longer lengths of timber? ignorance? malice? who knows) the blanket box maker has orientated the boards so that they run front to back putting all of the expansion and contraction along the length of the box. Here is the result:

image

By the end of winter that reveal is even. This tells us two things: the box was built in winter when the timber was at its least moist. And it was built by someone who didn’t know about (or care about?) seasonal movement.

Hoadley’s calculation for wood movement tells us that the change in dimension across the grain is equal to the initial dimension of the timber multiplied by the total shrinkage percentage of that species of wood multiplied by the product of the change in moisture content divided by the fibre saturation. There are going to be some estimates in this!

ΔDi=DS(ΔMC/fsp)

ΔDi=(31.5)(0.105)((0.28-0.22)/0.28)

ΔDi=0.95

This would be bad enough if I was working in centimetres but I’m using imperial! Almost an inch of potential movement. I’ve been fairly conservative in my estimates and we still end up with horribly large number. Some cabinet makers use a rule of thumb that wood will move up to 4% during the seasons. That’s 1 1/4 inches.

Note to self: Use narrow panels. Work out where the extra wood is going to go.

img_0324

When I made this panel at the start of the summer I broke the rules in the same as the way as the maker of our blanket box. The timber is flat sawn and so has more movement than vertical grain planks and the long grain runs in the shortest dimension.

Aware that I was breaking these rules I cut the groove in the frame deep and let the panel in half way into the groove.

It moves around a lot if you make it but it’s never going to show a gap or prise its frame apart.

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s